Automotive Accessories

Tremec’s Manual C8 Corvette Development Car Drives, but the Gearbox Alone Is Priced at About $75,000

Nerea ValdesNovember 17, 20265 min read3 views

At a glance

  • A one-off Peitz Performance track car shows how a clutch pedal and cable-shifted transaxle fit the mid-engine Corvette; Tremec says volume could lower the gearbox price.
  • Tremec has built a running manual-transmission C8 Corvette development car and demonstrated it at a private Michigan track. The conversion fits the stock dual-clutch location with tunnel changes for the clutch pedal, but the cable-operated shifter is less precise than Tremec’s front-engine TR-6060, and the gearbox alone is priced at about $75,000 before volume production.
A conceptual cutaway view of a mid-engine sports car on a test track, showing a manual transaxle, clutch pedal and cable-linked shifter.

Tremec has built a running manual-transmission C8 Corvette development car and invited the author of a test drive, along with several potential customers, to sample its transmissions at a private track in Michigan. The author drove a one-off Peitz Performance C8 race car fitted with Tremec’s new manual transaxle in place of the Corvette’s standard dual-clutch automatic. The car is a development car and demonstration build, not a General Motors production model.

The C8 was the first Corvette to move its engine behind the driver, and it launched exclusively with a dual-clutch automatic. The review argues that Chevrolet decided against developing two new transaxles—one manual and one automatic—for the mid-engine car because of the cost. That left manual enthusiasts without a factory option, even as the automatic helped the C8 compete in performance tests against more expensive cars.

A race-car conversion

The development vehicle was built by Peitz Performance and taken to Motorsports Gateway, a new private track outside Howell, Michigan. It is fully caged and fitted with a racing harness, and its interior finish is essentially absent. The manual gear selector emerges from the area normally occupied by the C8’s storage cubby and automatic gear selector.

Fitting the gearbox did not require a wholesale redesign of the rear structure. The tunnel was cut to install the clutch-pedal hardware, but the manual transaxle otherwise sits where the production dual-clutch unit would, without special mating hardware. The C8’s pedal box also has room for a clutch pedal; with the third pedal installed, the footwell was described as roomier than a previous-generation Camaro’s.

Cable shifter changes the feel

The shifter is remotely mounted, with cables running rearward to the transaxle. That layout makes the manual C8 less precise and less “snick-snick” than a front-engine car using Tremec’s TR-6060 six-speed. The rear-mounted transaxle also feels less notchy. Some drivers may prefer the smoother action; others may miss the more mechanical feel of the front-engine arrangement.

The test car’s seating position was not adjustable, and the driver—listed at 5 feet 7 inches—could not reach the floor or brace well in corners. That made heel-and-toe downshifts awkward and limited how hard the car could be pushed. Those are constraints of this race build rather than conclusions about a production package, but they limited the evaluation.

Price is the biggest obstacle

The gearbox alone carries a cited price of about $75,000. Combined with the cost of a Corvette, a manual C8 built this way would approach the price of a showroom Z06. Tremec says the price should fall as volume rises. The company also says OEMs are interested, and not necessarily or exclusively General Motors; other automakers have reportedly sought a high-torque manual transaxle. No customers were named.

For now, the manual C8 remains a demonstration of feasibility rather than a factory offering. It shows that the mid-engine Corvette can accept a clutch pedal and a manual transaxle in the space designed for the dual-clutch gearbox. Whether GM or another automaker commits to production depends on a business case that the one-off does not settle.

Reported by Nerea Valdes, Exterior Accessories and Weathering Editor.