SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor intended for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The company says the model extends its SGI Series and targets lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required.
Addressing surface-related variation
Conventional point-spot laser sensors concentrate reflected energy on a small area. SinceVision says microscopic scratches, grain boundaries, brushed textures and matte finishes can then create signal variations that are read as dimensional changes, potentially triggering false defect warnings and extra inspection. The SGI-N030W uses an expanded laser spot and optical triangulation. By gathering reflected light over a larger surface area, it averages local microscopic peaks and valleys before signal conversion. SinceVision says this reduces the influence of surface roughness and optical scattering on materials such as drawn metals, sandblasted surfaces and coated battery foils.
Specified performance and interfaces
The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies 0.05 µm repeatability on a diffuse white target under static conditions and ±0.02% of full-scale linearity across the range. Sampling at 50 kHz, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes. Communications include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage. Master-slave synchronisation lets two sensors operate in opposition, measuring from either side of a component or moving material.
Battery electrode thickness
One main application is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision notes that offline contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode material. Periodic spot checks also cannot provide continuous coverage across a production reel. In the proposed arrangement, two synchronised sensors sit above and below a moving electrode web on a calibrated, low-thermal-expansion marble gantry. The opposing heads measure clearance to the material, and a controller combines these readings with the fixed mounting datum to calculate absolute thickness in real time. SinceVision reports that production trials achieved stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate is intended to provide longitudinal resolution for detecting localised coating agglomerations, edge thinning and exposed substrate before cell winding.
Semiconductor and precision assembly uses
The SGI-N030W is also intended for semiconductor manufacturing, where non-contact measurement helps with sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, the sensor can monitor voice coil motors, linear actuators and micro-steppers. Its 50 kHz sampling rate is intended to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full measurement range. Position data can be sent to machine control systems over Ethernet for real-time monitoring and process control.
Company view
Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He explains that conventional point-beam laser sensors can read microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for additional manual inspection. The SGI-N030W’s expanded optical spot is designed to average out those surface-related variations, while synchronisation between opposing heads supports high-speed thickness verification, according to the company.
